All GST and shipping charges are included in the price.
These custom designed R&R Stainless steel tie rod sleeves are unique and one of a kind.
They provide all the added strength of quality 304 grade stainless steel. Not only do they provide the strength, they also provide very easy fitment.
- No need to remove or adjust anything.
- Save money with no need for a wheel alignment.
The 2 piece design allows the sleeve to be bolted together around the tie rod with stainless steel bolts which are all supplied as part of the package. (These are a perfect fit to suit between 14.5mm 15.5mm tie rods). If you have the narrow 14mm tie rods, pending the design, you may need to fill the clearance with sikaflex, or even 1 wrap of tape around the tie rod to fill the clearance gap for clamping pressure. (You will need to confirm that the tie rod sizes you have are between 14mm and 15.6mm as no refunds will be given if you have size above the max limit 15.6mm)
Fitting these sleeves only takes 6 minutes a side.
I recommend when running these sleeves to apply some thread locker/lock tight, to ensure bolts don't vibrate undone over corrugated roads and out on the tracks.
I also recommend running the steering rack clamp in conjunction with sleeves if your vehicle is an:
- Izuzu D-Max/Mux
- Holden RC/RG Colorado
- Holden Rodeo
Due to the fact these models are known for snapping steering racks off-road. So best to increase the strength of the rack and the tie rod at the same time.
These sleeves are recommended for off-road use only. However, they have been tested and ran both on and off road.They are extremely strong, and very safe. They are not ADR approved. So Buyers are to install or have installed correctly and run at own risk.